Release the Go button to perform the initialization. During the next three seconds, the Go, Ready and Attention lights turn on in that order, one per second.į. The Go, Attention and Ready lights turn on.Į.
Then the Attention and Ready light turns off, leaving just the Go light illuminated.ĭ. During this process the Attention, Ready and Go light turns on. Turn on the printer and continue to hold the Go button for at least 50 seconds. Reset the printer using the Super NVRAM initialization. Perform the following tasks in the order listed.ġ. The Light pattern is as shown in the diagram below.
The HP LaserJet P2015 may come up with Paper Jam Light solid and would show the same light pattern even if the printer is power cycled. HP LaserJet P2015 Printer Series - Paper Jam Light Solid Your printer may need replacement of the formatter board, however, please try the following before swapping the formatter. It seems that none of the printer's sensor is faulty, in fact, the printer has a faulty firmware on the formatter.
